Diagram (remote start & alarm)

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=5288
Printed Date: August 20, 2025 at 12:58 PM

Topic: Diagram (remote start & alarm)

Posted By: ARTS AUDIO`
Subject: Diagram (remote start & alarm)
Date Posted: November 09, 2002 at 8:23 PM

Hello! Everyone need a little help I am currently trying to install a remote start alarm combo in a 1967 Rolls Royce Silver Shadow. I need a wire diagram if anyone could help it would be greatly appreciated. Thanks in advance

-------------
88 OLDS Trofeo
Kenwood KDCXXX-859
Kenwood KAC-921(3)
Kenwood Comp(front)
Kenwood Comp(rear)
Punch HE2 Subs(3)

Replies:

Posted By: Velocity Motors
Date Posted: November 09, 2002 at 10:07 PM

???? Who needs to install a RS into that vehicle ?? Really......... will that vehicle even be left somewhere alone ? posted_image

You will have to use the DMM and locate the wires that way. It shouldn't be hard with that car. BTW: Is the Rolls even FI ??

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Posted By: ARTS AUDIO`
Date Posted: November 09, 2002 at 11:19 PM

The Rolls is'nt here yet, however I do think it is fuel injected. Supposedly the same engine in that car is used in some small airplanes. However I still would like to have a wire diagram if one is available thanks.

-------------
88 OLDS Trofeo
Kenwood KDCXXX-859
Kenwood KAC-921(3)
Kenwood Comp(front)
Kenwood Comp(rear)
Punch HE2 Subs(3)

Posted By: ARTS AUDIO`
Date Posted: November 09, 2002 at 11:23 PM

Heck who knows why people do what they do with there cars they bring it to me and ask can you do this or do that whatever may be the case and I try to accomadate them posted_image

-------------
88 OLDS Trofeo
Kenwood KDCXXX-859
Kenwood KAC-921(3)
Kenwood Comp(front)
Kenwood Comp(rear)
Punch HE2 Subs(3)

Posted By: PLAYER69
Date Posted: November 09, 2002 at 11:25 PM

You are not likely going to find a wiring chart for that car. Your best bet would be to go to a rolls dealer that has been around for a long time and get a service manual.

I also suggest that if the car does not start without touching the gas all the time it is likely not worth installing. Throttle solonoids can be a pain in the ass and can also be dangerous if not done right.

Posted By: ARTS AUDIO`
Date Posted: November 09, 2002 at 11:31 PM

I think the owner has a manual, and if it is fuel injected I will not have to use a throtle solenoid, if it is carbuerated then I will use the solenoid I've done a couple and it was a pain in the butt to say the least.

-------------
88 OLDS Trofeo
Kenwood KDCXXX-859
Kenwood KAC-921(3)
Kenwood Comp(front)
Kenwood Comp(rear)
Punch HE2 Subs(3)

Posted By: SOUND PRESSURE
Date Posted: November 09, 2002 at 11:33 PM

Hey Art good luck man! Post your results as you finish it.

-------------
Sound Pressure

You know you have the right amount of pressure when your eyes start to water! Now you've got Juice!