Viper 2-way, factory window roll down

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=52944
Printed Date: May 06, 2025 at 5:21 PM

Topic: Viper 2-way, factory window roll down

Posted By: DukeDuke
Subject: Viper 2-way, factory window roll down
Date Posted: March 31, 2005 at 6:06 PM

I have a 99 Nissan Maxima, and I have a Viper 2-way 791xv, my maxima as the control where you hold the button and the front two windows roll down... Do I need a window modulator if I put on the Viper 2-way, or is there a way to where I can still use the factory one? I want to have my rear windows roll down and my sun roof open as well... I have 1 window modulator, but I didn't know if I needed 2 more or not... thanks in advance.

-------------
Duke Duke

Replies:

Posted By: DukeDuke
Date Posted: April 01, 2005 at 12:04 PM

Come on now, I know with all these brilliant installers someone would know...

-------------
Duke Duke

Posted By: riceman
Date Posted: April 01, 2005 at 1:50 PM

https://www.carsound.com/cgi-bin/UBB_CGI/ultimatebb.cgi?ubb=get_topic;f=3;t=002070;p=0
This is an intresting post on nissan and infinity it should have the information your looking for. Hopefully it helps.

Posted By: dare_ds69
Date Posted: April 01, 2005 at 5:48 PM

use your outputs u just need the 528 t timer mudule for windows up for dowm just conect the 4th chanel to the unlock wire and that set

-------------
how own your mind, control your life.
MECP certified. always use a DMM

Print Page | Close Window