Hello all. I've searched extensively all over the internet and haven't found a solution to my problem. I have a Clifford Intelliguard 6000 installed on my 2003 Subaru Impreza. I had it professionally installed a couple years ago. I would now like to take advantage of the turbo timer feature (doing the “install” myself), and am having a bit of trouble getting it to work properly.
Here’s what I’ve done so far:
- programmed Auxiliary B output for TIMED operation
- programmed the “Autoactivate Auxiliary B” to OFF
- programmed the “Auxiliary B Interlock” to OFF
- wired the Auxiliary B negative output wire (gray/blue) to a 12v Bosch relay, to pin 85
- wired a fused 12v source to pins 86 and 87
- tapped into the 12v positive ignition output (GREEN/ blue)
I’ll have the engine running, press the Auxiliary B button, and turn the ignition off and remove the key. The engine keeps running like it’s supposed to. I’ll get out of the car. I press the button on the remote to arm the alarm, and NOTHING happens…..
I have a feeling that I missed something along the way and that I may need to add a second relay. Do I need to “trick” the alarm into thinking that the car’s engine is shut off, so that it will allow the alarm to arm? If so, how do I wire a second relay in?
Any help would be appreciated – as you can tell, I’m a bit of a noob, but trying to learn. TIA!!
mods - noob mistake. please delete. i'll repost in a separate thread....