Clifford RSX3.5 Sensor Questions
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=53015
Printed Date: May 10, 2025 at 8:12 AM
Topic: Clifford RSX3.5 Sensor Questions
Posted By: amb4life
Subject: Clifford RSX3.5 Sensor Questions
Date Posted: April 01, 2005 at 6:16 PM
I had this unit installed professionally however i am courious to know. I have a shock sensor which came with the unit and had a prox sensor insatlled at the same time of installtion. now on the remote it has sensor 1 and 2 however no matter what triggers the warning or full siren it will only say sensor 2 has activated. is this normal? what i would like is for the shock sensor to be sensor 1 and prox to be sensor 2 . is this possible?
-------------
Eclipse 5435
US Amps Merlin MD2 x 2
US Amps Merlin MD42
Kicker Solo X 18"
MB Quart QSD216 x 2
Replies:
Posted By: amb4life
Date Posted: April 06, 2005 at 9:51 PM
nobody knows huh?
-------------
Eclipse 5435
US Amps Merlin MD2 x 2
US Amps Merlin MD42
Kicker Solo X 18"
MB Quart QSD216 x 2
Posted By: nava94
Date Posted: April 06, 2005 at 9:54 PM
you might want to ask the installer to program your remote for sensor 1 to appear.
Posted By: kgerry
Date Posted: April 07, 2005 at 11:45 AM
depends on how it was wired...if they tapped the prox sensor into the shock sensor wiring then no...but you can hook it to the Blue trunk trigger if it's not being used and the prox sensor will appear as zone 4......
-------------
Kevin Gerry
Certified Electronics Technician
MECP First Class Installer
Owner/Installer
Classic Car Audio
since 1979
Posted By: Powermyster
Date Posted: April 07, 2005 at 12:01 PM
might say sensor two if he used the same channel with blocking diodes but i don't know why he would
|