bypassing the passlock

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=53045
Printed Date: May 12, 2025 at 3:08 PM

Topic: bypassing the passlock

Posted By: lilchepe
Subject: bypassing the passlock
Date Posted: April 02, 2005 at 9:39 AM

hey guys whats up , well my question is how can i bypass the factory anti theft system. i am using a 457g from DEI. the real problem im having is finding out were the passlock module is located. can anyone please help me out.

Another way of doing it is using two relays but only problem is it requires a resistor and well honestly i dont know what the resistance measure is. i apreciate your help thank you . Sin. Jose

Replies:

Posted By: lilchepe
Date Posted: April 02, 2005 at 9:47 AM

im sorry guys i forgot to mention this is on a chevy 2005 colorado

Posted By: NowYaKnow
Date Posted: April 02, 2005 at 9:55 AM

I don't think the 457G is applicable on the colorado you would need a 555L or a PLXR.

Mike

Posted By: Velocity Motors
Date Posted: April 02, 2005 at 9:55 AM

The Passlock system you will need to use the PLXR from bypasskit and it will also double as your 2nd IGN activation wire. You can access the Passlock wires when you remove the lower portion of the driver's dash. The wire are running along side with the ignition wires .The wires are WHITE/ YELLOW ( POWER ) & WHITE/ BLACK ( DATA ).

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Posted By: lilchepe
Date Posted: April 02, 2005 at 10:09 AM

thanks for the advice guys , but is it possible to use a set of relays and if so can i have a diagram please. thanks for the advice once again. this is the hardest truck i've worked on so guys i apreciate the advice. thanks Sin. Jose

Posted By: Velocity Motors
Date Posted: April 02, 2005 at 11:06 AM

I've tried using the relay diagram before and it doesn't work ( that or I didn't get the right diagram for the Pursuit that I did ). You will need 3 relays and resistors for the set up. It's easier to buy the module and more reliable as well.

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA