791xv channels?

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=53047
Printed Date: May 12, 2025 at 8:44 AM

Topic: 791xv channels?

Posted By: c0ckeyed00
Subject: 791xv channels?
Date Posted: April 02, 2005 at 9:42 AM

i just wanted to know how the channels work?

which ones are already used by the alarm?

how do i program the channels?

thanks

Replies:

Posted By: auex
Date Posted: April 02, 2005 at 9:43 PM

It will be easier to tell us what you want to do.

Channel 2(RED / white) is trunk pop channel and cannot be programmed. Channel 3(WHITE/ blue) is remote start activation and cannot be programmed. Channel 4( I think is PURPLE / black) is an acc output usually used for things ranging from windows to radio turn on and is programmable for validity, latched, latched for 30 seconds, or latched with ign reset.

-------------
Certified Security Specialist
Always check info with a digital multimeter.
I promise to be good.
Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.

Posted By: c0ckeyed00
Date Posted: April 04, 2005 at 2:39 AM

How many channels are used by the alarm, two(2 and 3)? I just wanted to know what I can add to my alarm. I am going to get the 2 window up/down modules for all 4 of my windows. I also want to get: tilt sensor, glass break, back batt.....

latched meaning active right?