door lock for cable type systems

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=53159
Printed Date: May 02, 2025 at 9:04 PM

Topic: door lock for cable type systems

Posted By: swamprat323
Subject: door lock for cable type systems
Date Posted: April 03, 2005 at 6:57 PM

Found this site, it looks like tere are locks specially for cable type system, waht are different about them, all i see is a bracket, but any one use these.

https://www.a1electric.com/cable_locks.htm

Replies:

Posted By: NowYaKnow
Date Posted: April 03, 2005 at 8:31 PM

Your correct the only difference is the extra bracket they give you. You use that bracket to keep a small section of the cable straight so that you can remove the cable covering and attach a normal style rod to it. I wouldn't advise removing the covering from the OEM cable I haven't seen a vehicle with cable locks yet that this would be necessary.

Mike

Posted By: swamprat323
Date Posted: April 03, 2005 at 8:36 PM

that what i though, and i have not came across a car yet that i could not install a lock, but then again, a lot a cas that i have not doen thoght.

Print Page | Close Window