remote start atv
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=53196
Printed Date: May 21, 2024 at 2:08 AM
Topic: remote start atv
Posted By: cruelneo
Subject: remote start atv
Date Posted: April 04, 2005 at 8:36 AM
im going to put a remote start on my atv i was wondering is there anyway i dont have to find a tach my atv dosent have one that i can see thanks for any help
-------------
850 volvo
10-8" kicker freeair on
old punch 250 p.c.
3 sets of 6.5" 4" 1" mbquarts
bi-amped on 3 alpine mrv-f340
2-jl 6" subs in doorpannel
on old punch 40ix
and running it all
kenwood kdc-x87
Replies:
Posted By: kash
Date Posted: April 04, 2005 at 11:09 AM
Depending on your remote start, you don't really need one, I have a Viper 791XV alarm/starter on my truck, and it has a function you can program to simply crank the engine for a certain amount of time, which you also program.. Also, it has a function to sense voltage rather then a tach signal, so you could use any wire that produces voltage when running.. Not sure if a basic remote start would have these features or not.. Is your ATV a 12 volt or 6 volt system? I assume you know it needs to be 12v.
Posted By: cruelneo
Date Posted: April 04, 2005 at 11:22 AM
its 12 volt and its cheap aps 775 im not sure if this alarm has it
-------------
850 volvo
10-8" kicker freeair on
old punch 250 p.c.
3 sets of 6.5" 4" 1" mbquarts
bi-amped on 3 alpine mrv-f340
2-jl 6" subs in doorpannel
on old punch 40ix
and running it all
kenwood kdc-x87
Posted By: kash
Date Posted: April 04, 2005 at 11:46 AM
Alot of the remote starts I've seen tell you to simply use a coil wire for a tach wire, you could try that.
|