Clifford programming question

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=53279
Printed Date: May 07, 2025 at 7:06 PM

Topic: Clifford programming question

Posted By: mark9841
Subject: Clifford programming question
Date Posted: April 05, 2005 at 1:35 AM

I have installed a Clifford Intelliguard 700 IQ on one of my vehicles. In the programming features table there is an option at column 5, row 6, that says "High/Low: on/off".

I am also installing an Intelliguard 800 on another vehicle, and I see this same option in the programming features table at column 3, row 5, for this alarm.

Does anybody know what this feature does?

Replies:

Posted By: mark9841
Date Posted: April 07, 2005 at 2:33 AM

C'mon, help me out here! I see alot of you have looked at this post, but no replies. Somebody must know what this programming option does! It's "High/Low : on/off" Please help, thanks.

Posted By: dare_ds69
Date Posted: April 07, 2005 at 6:32 AM

i don't find the programing page for 700 or 800 i see the 750 i don't know sorry

-------------
how own your mind, control your life.
MECP certified. always use a DMM

Posted By: dare_ds69
Date Posted: April 07, 2005 at 6:45 AM

https://www.directechs.com/techtips/pdfs/resources/security/clifford_techtips/49000313.pdf

hope, it helps u good luck just read carful

-------------
how own your mind, control your life.
MECP certified. always use a DMM

Posted By: mark9841
Date Posted: April 07, 2005 at 10:54 PM

Thanks, got it. The answer is in the Techtips paper.

Print Page | Close Window