alarm to central locking

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=53301
Printed Date: May 14, 2025 at 7:58 AM

Topic: alarm to central locking

Posted By: merseyscouse
Subject: alarm to central locking
Date Posted: April 05, 2005 at 10:36 AM

Find attached a wiring diagram of the central locking on my fiesta, question is were do i attach my alarm pulse wire (can be ground or positive) to, to lock or unlock the car....thanks

posted_image

Replies:

Posted By: lukeb
Date Posted: April 05, 2005 at 10:44 AM

what alarm do you have?

Posted By: merseyscouse
Date Posted: April 05, 2005 at 10:50 AM

its a scorpion, the alarm is on and working fine except for the central locking....i also have a maplins central locking interface if needed

Posted By: merseyscouse
Date Posted: April 06, 2005 at 7:49 AM

this is the interface instructions, can somebody tell me which wires on the car (above diagram) need to be cut???

thanks

posted_image

Posted By: merseyscouse
Date Posted: April 06, 2005 at 8:45 AM

this car is only 2 door and this is a modified diagram, but, still scared to cut any wires!!

posted_image

Posted By: nava94
Date Posted: April 06, 2005 at 9:30 PM

what's the year of the fiesta?

Posted By: merseyscouse
Date Posted: April 07, 2005 at 1:20 PM

2001...i have been told it is multi point positive but dont know how to test this assumption

Print Page | Close Window