Print Page | Close Window

unusual dei 530t problem

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=53319
Printed Date: May 06, 2024 at 3:59 AM


Topic: unusual dei 530t problem

Posted By: Captanham
Subject: unusual dei 530t problem
Date Posted: April 05, 2005 at 3:28 PM

Ok, i am just now installing this thing in my personal car, now this thing has some hard windows, but after instalation, they all roll up fine, no problems even on lowest setting..,, BUT, when i try to get them to go down, the passengers goes fine, and the drivers stops about 2/3rd's down.. now this car DOES have a one touch drivers window from the factory, BUT that is in the switch.. so i'm possitive that the connection is between the motor and they system... still it seems strange to me that it would mess up going DOWN, sence it is harder to get a window to go up.. any help guys? i've tryed this on the highest settings, AND i even tryed removing the internal resistors to make it work even harder, still,, same problem, any help?



-------------
Bad Boys Customs
    audio - video - security

If you use it. Suport it. Donate to the 12 volt!



Replies:

Posted By: Captanham
Date Posted: April 05, 2005 at 8:38 PM
ok, fixed it, i'm not really sure how, but it's workin, i guess i had something wrong with the dip's or something, but i played around for a while and it's all smooth, thanks anyways guys

-------------
Bad Boys Customs
    audio - video - security

If you use it. Suport it. Donate to the 12 volt!


Print Page | Close Window