HID in chrysler 300 2005

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=53488
Printed Date: May 07, 2025 at 7:04 AM

Topic: HID in chrysler 300 2005

Posted By: dare_ds69
Subject: HID in chrysler 300 2005
Date Posted: April 07, 2005 at 5:43 PM

Did somebody install hid in this car? i was trying to do today, but it did't work i heard that you have to put 10 ohm resistor in line to aboid the light in the dash but the problem is not that is that the factory wires can not turn on the relays, for some reason it does't have enough power to turn on the relays :errr:

somebody have an idea or hear something let me know please :oops:

Thanks;)

-------------
how own your mind, control your life.
MECP certified. always use a DMM

Replies:

Posted By: dantemc
Date Posted: April 08, 2005 at 12:33 AM

hey whats up? i have a few questions. are the hids new or used, and what brand are they. i havent seen any hids made this year that use relays. the kit should include a few sets of plugs, 2 bulbs, and 2 ballasts.the only reason someone would use relays was if you had the same bulb that did both high and low beam, like the 9004. i believe that car is either 9005 or 9006. is that the type of kit you have? make sure the ballasts are good because i have done those light with no problem.

-------------
unique auto sound new york
mecp certified
diamond, memphis, kicker, clarion, phoenix gold, rockford fosgate,panasonic

Print Page | Close Window