domelight trigger/clifford alarm

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=53497
Printed Date: May 07, 2025 at 9:00 PM

Topic: domelight trigger/clifford alarm

Posted By: 02SS
Subject: domelight trigger/clifford alarm
Date Posted: April 07, 2005 at 7:18 PM

Could anyone out there help with some sort of diagram. Basically I am installing a clifford intellivoice alarm into an 1957 chevy truck with updated wiring. This truck originally came with no door pinswitches to activate domelight. So my question is how do I wire door pin switches to activate dome light with alarm? I have a relay but I am not sure how to wire it up with alarm. Any kind of diagram for the relay would be great.

Replies:

Posted By: mo12v
Date Posted: April 07, 2005 at 8:07 PM

<<< into an 1957 chevy truck with updated wiring >>>

Not sure what that means, but if you have NO Door Pin Switches, U could put them in or if you are just trying to make your Dome light come on when U Unlock, U can wire Relay to activate Dome Light but that won't Trigger Alarm.

-------------
MO

Don't Learn from Others Mistakes
You Might Be the One That Knows.

Posted By: auex
Date Posted: April 07, 2005 at 10:55 PM

So you have added your own pinswitches correct? If that is the case then all you have to do is wire your domelight's + input to constant and wire the -input to the pin switches. No relay needed.

-------------
Certified Security Specialist
Always check info with a digital multimeter.
I promise to be good.
Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.

Print Page | Close Window