Installing Power Door Locks

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=53533
Printed Date: May 09, 2025 at 6:46 PM

Topic: Installing Power Door Locks

Posted By: 71machone
Subject: Installing Power Door Locks
Date Posted: April 08, 2005 at 8:57 AM

I would like to install power door locks in a 71 Mustang. In addition to door panel switches, I want to connect them to an existing alarm (Alpine SEC-8049) for locking/unlocking. Here are a few questions I have:

1. What brand should I buy?

2. Do I get a central power lock kit?

3. How many wires should the actuators have?

4. Do I need relays or does the Alpine have them already?

Thanks, your input is greatly appreciated.

-------------
71Mach

Replies:

Posted By: Autoobsession
Date Posted: April 08, 2005 at 10:27 AM

You can get a DEI power lock system or a SPAL power lock system. These kits usually come with everything you need. Wiring, Switches , and relays. They have input wires for you alarm system so that you can control the locks with your remote.

-------------

Posted By: floaterr
Date Posted: April 11, 2005 at 12:30 AM

https://www.autoloc.com/products.lasso

Print Page | Close Window