Print Page | Close Window

2000 Intrepid door lock

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=53546
Printed Date: May 04, 2024 at 1:47 PM


Topic: 2000 Intrepid door lock

Posted By: deames
Subject: 2000 Intrepid door lock
Date Posted: April 08, 2005 at 2:59 PM

I'm Installing a Viper 350hv alarm is it necessary to use relays to pulse the lock/unlock wire into the bcm or can I just put diodes and resisters in the wires comming from the alarm module?



Replies:

Posted By: KarTuneMan
Date Posted: April 08, 2005 at 5:25 PM

yes use relays.....and resistors, no diodes

900ohm,disarm and unlock, double pulse

1.6kohms lock and arm



-------------


Print Page | Close Window