Viper 791XV

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=53587
Printed Date: May 09, 2024 at 5:28 AM

Topic: Viper 791XV

Posted By: deezy
Subject: Viper 791XV
Date Posted: April 09, 2005 at 11:09 AM

I installed the Viper 791 XV but my accessories stay on does anybody know how to turn off a (RAP) Retained Accesory Power in a 2000 Dodge Intrepid help please thanks

-------------
Larry

Replies:

Posted By: tjdurham
Date Posted: April 09, 2005 at 10:06 PM

if you are worried they will go out in 10 minutes just pulse a ground to the drivers door pin wire with the wire that says pulse arter shutdown (forgot which one it is but it will say so in the manual)

-------------
tj

Posted By: bretbowman
Date Posted: April 11, 2005 at 1:16 AM

If you have hooked your door trigger wire in correctly the accesory power should go off as soon as you open a door. This is likely the real problem. I'm not aware of any way to "disable" this feature on the alarm itself, other than hooking up one of the OTHER power wires that is not "retained".

Good luck!

-------------
2002 Toyota Sequoia Limited 2WD (Clifford G5 Avantguard 5 w/ 2 SmartWindows modules) - IT Engineer - NRA Life Member - LDS Return Missionary - Married for time AND ETERNITY - Eternally sealed family

Posted By: deezy
Date Posted: April 14, 2005 at 7:18 PM

it is not a factory thing it just started doing it on the Viper 791 XV. i had a commando alarm but I didn't have this problem with it

-------------
Larry