Print Page | Close Window

door lock actuators

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=5359
Printed Date: May 28, 2024 at 11:47 PM


Topic: door lock actuators

Posted By: dj styles
Subject: door lock actuators
Date Posted: November 11, 2002 at 9:55 PM

first i would like to thank everyone for all the helpful info you guys provide. my question is this, i installed some after market actuators on my wifes car on the front doors only, now i want to do the rear doors, will i have to use another set of relays or can i just tap on the ones im using now. the door locks are controlled with the alarm.

-------------
gabriel correa



Replies:

Posted By: PLAYER69
Date Posted: November 11, 2002 at 9:59 PM

It should have built in relays and you should be able to just tap into the existing wiring. 




Posted By: Ohmz
Date Posted: November 12, 2002 at 4:46 AM
You can tap into the existing relays with no problems. The relays give out enough output to power up all the actuators when connected the right way.

-------------
My Personal Installer Note: Connectors are easy, neat, and professional. But do you know how to crimp properly?




Print Page | Close Window