2 way alarm pager problems
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=5363
Printed Date: August 17, 2025 at 10:15 PM
Topic: 2 way alarm pager problems
Posted By: polocozz
Subject: 2 way alarm pager problems
Date Posted: November 11, 2002 at 10:25 PM
I had a crimestopper 2 way pager car monitor installed in my car as an addition to my crimestopper alarm. after the alarm is activated and the aystem is armed it begings to go off and show the passenger door is open. i am not sure why this is because the alarms is safe and sound and it isnot going off. I am wondering if the motion detectors in my house can cause this because i noticed this problem when i walked in my door and i began to expiriment. I also noticed at my girl friends house where there is a similar motion detector configuration. . The door open sign also came on when i turned on my computer. Help what can i do?
Replies:
Posted By: Sebastian018
Date Posted: November 12, 2002 at 4:37 PM
HI, You have to check the wires, there has to be a cable which is not connected in the right way, because that happen to me one time.
Posted By: Velocity Motors
Date Posted: November 12, 2002 at 5:24 PM
What kind of car is it ? Year, make & model ? Chances are you are getting a residual current in the door trigger wire and you will need to isolate the circuit with diode(s)
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
|