Confirm My 451m Wiring Please

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=53813
Printed Date: May 04, 2024 at 1:32 AM

Topic: Confirm My 451m Wiring Please

Posted By: Need 2 b lower
Subject: Confirm My 451m Wiring Please
Date Posted: April 12, 2005 at 10:23 PM

I am a newbie to alarm wiring, but installed my viper 791xv with no problems. At the time i didnt have power door locks, but now i do. So before i go guessing wires 9since i lost the wiring booklet) i need you to confirm my guess for the 451m. I but after market door actuators in, so they are 2 wire. So...

I plug the white plug into the alarm brain

I give the purple wire with the fuse a constant 12 volts.

Then blue and green heavy guage wires go to driver side actuator

And white and brown heavy guage wires go to passenger lock.

Please help me and thanks in advance...

Replies:

Posted By: auex
Date Posted: April 12, 2005 at 11:12 PM

No, white plug to alarm, purple to constant, white and brown to ground, and blue and green to both actuators. Blue and green wires will be the lock and unlock output. There really is no way to tell which one will be which because it depends on how you mounted the actuators. So tie the wires for the actuators together, take a drill battery to them, if they both lock and unlock together then you are good if not then switch one set of the wires around. Then hook the wires to the blue and the green, hit lock, if the car's locks lock then you are set, if they unlock then you need to switch the wires around.

-------------
Certified Security Specialist
Always check info with a digital multimeter.
I promise to be good.
Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.

Posted By: Need 2 b lower
Date Posted: April 12, 2005 at 11:15 PM

cool thanks alot man