2001 Dodge Stratus keyless entry install
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=5384
Printed Date: August 13, 2025 at 3:00 PM
Topic: 2001 Dodge Stratus keyless entry install
Posted By: AlterCow
Subject: 2001 Dodge Stratus keyless entry install
Date Posted: November 12, 2002 at 5:43 PM
I'm installing a Prestige Keyless Entry and Remote starter Aps685. Well I got the remote start hooked up and running fine. My problem is that my dodge uses a (+) single wire for the power locks. It says to install two resistors on the unlock side use a 750 ohm and lock side a 1800 ohm. So, I popped in to the nearest Radio Shack and they start whipping numbers at me. Does anyone know what the tolerance % i need to use and the watts I need for the resistors?
-------------
Totally lost
Replies:
Posted By: PLAYER69
Date Posted: November 12, 2002 at 5:50 PM
1/4 watt will be fine. Any tolerance will be ok.
Posted By: AlterCow
Date Posted: November 12, 2002 at 6:02 PM
Thanks, I had the deer in the headlights look.
-------------
Totally lost
Posted By: PLAYER69
Date Posted: November 12, 2002 at 6:11 PM
Posted By: djfearny2
Date Posted: November 12, 2002 at 6:21 PM
and you know , you must use relays.
-------------
Jon
Installer/Help Technician
---coral springs florida---
mecp certification is not always needed. I have it and it has not helped me out at all. my experience out shines it.
Posted By: AlterCow
Date Posted: November 15, 2002 at 5:12 PM
Why Relays?
-------------
Totally lost
Posted By: Velocity Motors
Date Posted: November 15, 2002 at 11:13 PM
Chrysler uses a (+) trigger and most units have a (-) trigger. Relay used to reverse polarity.
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
|