second ignition for engine start omega e

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=53907
Printed Date: May 07, 2025 at 9:07 PM

Topic: second ignition for engine start omega e

Posted By: ericriva
Subject: second ignition for engine start omega e
Date Posted: April 14, 2005 at 1:14 PM

Have a truck that needs second ignition for engine start. The Omega Manual calls for a RS-RP dual relays my distributors doesn't carry them and I was wondering if someone has a wiring diagram for this type of relay set up. Or can I just 3 way the second ignition wire? Any advise would be greatly appreciated. Eric

Replies:

Posted By: metaverse
Date Posted: April 14, 2005 at 4:39 PM

One way of doing this..

Leave ignition 1 from alarm connected to car's ignition 1. Wire a relay with poles 86 and 87 going to fused 12volt pin 30 goes to second ignition wire on vehicle and pin 85 goes to ground out while cranking from alarm brain.. When the car cranks..ignition 1 and ignition 2 are powered on.

Posted By: ericriva
Date Posted: April 14, 2005 at 5:33 PM

thank for the info will do this Eric.

Posted By: dare_ds69
Date Posted: April 14, 2005 at 5:39 PM

87 12v fused

30 goes to second ignition

85 TO CHASIS GROUND

86 MAKE A JUMPER TO THE FIRST IGNITION

-------------
how own your mind, control your life.
MECP certified. always use a DMM

Print Page | Close Window