MRS / Mr2 Spyder Turbo Timer Install
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=53908
Printed Date: May 11, 2025 at 12:16 PM
Topic: MRS / Mr2 Spyder Turbo Timer Install
Posted By: jdm monkey
Subject: MRS / Mr2 Spyder Turbo Timer Install
Date Posted: April 14, 2005 at 1:19 PM
I pretty much know basic electronics and I have, in a way, "successfully" installed an Apexi Turbo timer in my 2000 Mr2 Spyder. The problem: after the car shuts down, the door locks would pop open. I need help in figuring out a relay wiring triggered by the key sensor to the door locks. I have located the trigger wires but ineed more info. I don't want to fry my electronics. :/ Thanks
Replies:
Posted By: 5150azn
Date Posted: April 14, 2005 at 2:12 PM
Hey jdm dude! I used to be into imports and owned a shop of my own. I used to have this dope 92 eclipse gsx that was unbeatable. Anyways your doorlock problem sounds like you have ignition controlled doorlocks. First call toyota and ask them how to disable the ignition controlled doorlocks. It's usually in your owner's manual too. But if you have aftermarket security you may have to call the techline!
Lemme know if you need mo help!
-------------
Tell the Snap-On guy I'm not here!
|