Print Page | Close Window

astro start 1105 programming

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=53965
Printed Date: May 17, 2025 at 6:18 PM


Topic: astro start 1105 programming

Posted By: ziggyb222
Subject: astro start 1105 programming
Date Posted: April 15, 2005 at 10:09 AM

Had a customer come in with an Astro start remote starter. He needed to program another remote. Went to the web site with no luck on program proceedure. It is an 1105 with the main switch under the dash for valet I believe. Any have any idea what might work for programming this unit. The local dealer(100 miles away) was no help. Thanks in advance



Replies:

Posted By: KarTuneMan
Date Posted: April 15, 2005 at 12:20 PM

to program another remote, first make sure you have the FIRST remote, you need both.

Access the brain, the on/off switch needs to be on! flip up dip#8 push the brake once, watch the led on the brain. itll flash to let you know your in program mode. push the lock on th first remote, then the unlock on the second. you should here and see confimation of the brain recieving the transmission. after BOTH have been programed, flip down dip# 8 and hit the brake once.....DONE. You dont need the key in the ignition or anything K

Id say good luck.....but you dont need it, its easy



-------------


Print Page | Close Window