Print Page | Close Window

99 Ford Contour, alarm/remote start

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=53970
Printed Date: May 17, 2025 at 11:33 PM


Topic: 99 Ford Contour, alarm/remote start

Posted By: meh66
Subject: 99 Ford Contour, alarm/remote start
Date Posted: April 15, 2005 at 12:22 PM

Hello,

    I am about to put a full alarm with remote start on a 99 Ford contour. The Information from 12 volt seem straight forward, but I wanted to know why the word heater was put next to the ignition wire location?

This What I meant:

Wire                                Color                            Wire Location

Ignition                           Green                           Ignition Switch Harness (heater)



-------------
MEH66
"Car Performance and Mobile Electronic Enthusiats"



Replies:

Posted By: the12volt
Date Posted: April 15, 2005 at 12:37 PM
That indicates that it also supplies 12V to the heater/AC. In some vehicles when installing a remote start you'll need to connect to a second ignition lead (shows 12V+ when the key is in the run position only) to enable the heater/AC to work when running by remote start. 

-------------
posted_image the12volt • Support the12volt.com


Print Page | Close Window