diodes

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=54044
Printed Date: May 21, 2025 at 10:44 AM

Topic: diodes

Posted By: jaytelco
Subject: diodes
Date Posted: April 16, 2005 at 6:51 PM

i want to add another shock sensors to my alarm

was wondering which wire to add the diode

Replies:

Posted By: eurotek
Date Posted: April 16, 2005 at 7:49 PM

u do not need to add any diodes, simply piggy back the previous shock sensor, or use a negative trigger input from the alarm, usually the blue wire, and feed the shock sensor a positive and negative, diodes are made to keep circuits backfeeding, it keeps them separated.

Posted By: jaytelco
Date Posted: April 16, 2005 at 8:36 PM

thats what i want to do keep it seperate

im going to install 2 shock sensors 1 for each headlight

and a dual zone sensor

Posted By: jaytelco
Date Posted: April 17, 2005 at 11:00 AM

i have an acura 3.2tl and people like to steal the head lights

Print Page | Close Window