APS996 start with high temp?

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=54226
Printed Date: May 10, 2025 at 3:05 AM

Topic: APS996 start with high temp?

Posted By: alig2
Subject: APS996 start with high temp?
Date Posted: April 19, 2005 at 1:12 PM

What can I use to add a start on a high temperature to an APS996? Crimestopper has an RS-400, but it appears to be a start on cold temp unit. Any ideas out there?

Replies:

Posted By: floaterr
Date Posted: April 20, 2005 at 5:44 PM

Well I thin DEI makes a window module that will vent the windows at a certain temp. Alot of times these modules have a output to activate a 2nd window unit. This might able to be attached to the alarm, IF the alarm has a wire that will instantly start the car when the wire goes to ground. Or have the output of the window unit flip a relay instead of the window.

Good luck

Posted By: accord78
Date Posted: April 20, 2005 at 6:29 PM

u can get a dei 556t valet digital time/temp remote start controller works great

Posted By: Montrealler
Date Posted: April 20, 2005 at 7:44 PM

A regular thermostat (home one for electric heating)

Generate a single pulse to trigger the starter (use a pulse generator or cap and a relay as the pulse generator.

1500 or 2000 uF 25v (polarized) in serial with the coil of a relay.

Bigger will be the cap longer will be the pulse.

Print Page | Close Window