Print Page | Close Window

Clifford Concept G4 600 info needed

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=54237
Printed Date: May 09, 2025 at 8:21 AM


Topic: Clifford Concept G4 600 info needed

Posted By: BLACKTJ
Subject: Clifford Concept G4 600 info needed
Date Posted: April 19, 2005 at 2:35 PM

Hello everyone,

I'm a new member, glad to be on board!  I am looking for information and wiring diagrams for my Clifford G4 Concept 600 alarm.  I am looking at installing power door acuators on my alarm and would like to know which wires to use for these.  I also have a piezo siren I would like to install off my old alarm, and the Clifford site and documentation has no information whatsoever on wiring diagrams.  A full list or any information on my alarm would be very much appreciated.

Thank you!

Tony.




Replies:

Posted By: BLACKTJ
Date Posted: April 19, 2005 at 2:50 PM

ahh, found it on another post, sorry to waste everyone's time!

https://www.directechs.com/guides/manuals/ig/clifford/concept600_install.pdf

Another quick question, I am having TERRIBLE (20 feet if I am LUCKY!) reception from my remote to arm/disarm the alarm.  I've tried a 2nd antenna from the installer and I get the same terrible range.  The antenna is stuck directly on my windshield.  The battery in the remote is new too...  Any ideas?


Print Page | Close Window