Print Page | Close Window

Viper 650XV etc in 2005 Sierra

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=54245
Printed Date: May 09, 2025 at 12:23 AM


Topic: Viper 650XV etc in 2005 Sierra

Posted By: sssmokin99
Subject: Viper 650XV etc in 2005 Sierra
Date Posted: April 19, 2005 at 3:54 PM

I have a new '05 GMC Sierra "base" model (not Work truck, not SLE) that has factory power locks, but no keyless entry.  I also have, in the box, the following:

Viper 650XV,  Viper GPS, Viper 456g

All I have done so far is locate the BCM under the dash.

Any suggestions as to which component to start with?  Or should I find a DEI expert in Kansas City and give the whole mess to him and go have a cold refreshment?

I am primarily interested in the keyless entry function, since the vehicle already has Passkey II, and of course the GPS for when they just decide to tow it off. 

Thanks very much for any advice you would give me!




Replies:

Posted By: Bmnicolosi
Date Posted: April 20, 2005 at 10:24 AM
i always start with the alarm itself first, the 650xv part.  everything else is a plug into that.

-------------
If you say "I already know how", don't ask me a single question.


Print Page | Close Window