Negitive door wires - Grand Am

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=54261
Printed Date: May 11, 2025 at 6:39 PM

Topic: Negitive door wires - Grand Am

Posted By: mooch01
Subject: Negitive door wires - Grand Am
Date Posted: April 19, 2005 at 9:48 PM

Hello, I have a 97 Grand Am and I'm installing a remote start and keyless entry.
I only have the following wire to hook up. GREEN WIRE: Negative Door Input (-). Connect to the door switch circuit wire that shows ground when the door is open.

I can not find a door switch on the car and the dome light is activated when the door open or shut. It probably has to do with completing he ground.

I have a few diagrams, is this the Door trigger wire? If not any help on locating the right wire would be appreciated.

Thanks
Mooch01

Replies:

Posted By: vt_hokie2008
Date Posted: April 19, 2005 at 10:11 PM

sounds like the door trigger wire to me

Posted By: mooch01
Date Posted: May 09, 2005 at 9:11 PM

*** DOOR TRIGGER grn/blk, lt.blue *2 - drivers kick-pass kick****
*2 You must diode isolate these wires

What type of diode? Is that 2 lt.blue and a grn/blk and does only the lt.blue get diode isolated?

Posted By: mo12v
Date Posted: May 09, 2005 at 9:36 PM

1 amp diode will work

Dome Light

L GRN/BLK & L BLUE (-)

AT CONVENIENCE CENTER MODULE *

* Convenience Center Module Located Behind Driver Dash To Left Of Steering Column. L GREEN/ BLACK (-) Covers Driver Door, L BLUE (-) Covers All Other Doors. Diode Isolation Needed, Cathode (Band) Side Of Diode Faces OEM Wires.

-------------
MO

Don't Learn from Others Mistakes
You Might Be the One That Knows.

Posted By: mooch01
Date Posted: May 10, 2005 at 7:41 AM

Thanks, will try.

Print Page | Close Window