Window rollup module in a 1994 BMW 740iL
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=54277
Printed Date: May 19, 2024 at 8:27 PM
Topic: Window rollup module in a 1994 BMW 740iL
Posted By: harrisrc
Subject: Window rollup module in a 1994 BMW 740iL
Date Posted: April 20, 2005 at 2:35 AM
Anyone install a window rollup module in a 1994 BMW 740iL before? In process of doing so and I found out that the windows are rolled up and down (at the window switch) using a (-) negative trigger. Now as I write this I am thinking that maybe I should wire it to the motor itself instead of using the switch, any I deals? In previous installs I wired it to the switch using the DEI 529T or 530T modules that way it was possible to have the one touch control in both directions on all windows. In the 740, I have one touch for down on all windows but only the driver side has one touch for up. Any assistance in this matter is greatly appreciated. Also the same thing is for the sunroof, I would like to add the DEI 529T to the sunroof.
Replies:
Posted By: harrisrc
Date Posted: April 21, 2005 at 6:55 AM
Duh! bad post.... Found the answer by turning the page in the installation manual
|