daihatsu door locks
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=54278
Printed Date: June 08, 2024 at 10:38 AM
Topic: daihatsu door locks
Posted By: bmwboi
Subject: daihatsu door locks
Date Posted: April 20, 2005 at 4:16 AM
I need some help with daihatsu door locks. There is 4 wires in the harness one wire changes from 0v to +5v (cant remember if it was lock or unlock) the 2 middle wires show voltage spikes the quickly drop back down to 0v straight way. and the last cable shows no voltage at all. I think this is a 1 wire door lock system. am i correct? btw If i cut the wire that shows +5v when lock, the other doors dont respond. and if i ground one side of the cut cable it will unlock. But when i tried to pulse the cable with +12 i killed a fuse.
Replies:
Posted By: harrisrc
Date Posted: April 20, 2005 at 4:32 AM
Posted By: bmwboi
Date Posted: April 20, 2005 at 4:45 AM
the car im working on is a sirion and it has factory central locking.
Posted By: KarTuneMan
Date Posted: April 21, 2005 at 11:46 AM
Does the drivers door have a lock/unlock switch... ? If NOT you need to add an actuator, to move the lock mechanism in the door. -------------
Posted By: bmwboi
Date Posted: April 22, 2005 at 10:38 AM
Hi KarTuneMan The doors dont have a actual lock and unlock switch (like in the center console of camrys). But when u insert the key into the drivers door, all 4 doors will lock and unlock together. When putting key into the passenger door lock, only the passenger door responds.
Posted By: KarTuneMan
Date Posted: April 23, 2005 at 3:11 PM
Install an actuator in the drivers door that will control...Or duplicate the action of the key...and all the doors wil unlock and lock....thats how ya doo it......  -------------
Posted By: nava94
Date Posted: April 23, 2005 at 5:18 PM
just like hyundai,95 rodeo,kia you need an actuator in the driver door to work with the alarm if not the factory driver motor will freeze up and you won't be able to open your door.
Posted By: bmwboi
Date Posted: April 24, 2005 at 6:53 PM
thanks guys. i thought i was able to connect to the factory locking system. I'll head out and but a actuator kit.
Posted By: KarTuneMan
Date Posted: April 24, 2005 at 7:34 PM
bmwboi.....remember...you only need 1 actuator, drivers door only...K good luck dude -------------
Posted By: bmwboi
Date Posted: April 29, 2005 at 1:48 AM
Thanks KartuneMan and Nava94 The security system is 98% done, Door locks worked like a charm. But I have a problem with the door triggers. I found the door triggers that will only show neg when open. My CHEAP alarm from ebay willshows me a 5+ on the door trigger wire. Is there a error in my manual that shows me the wrong wire? Here is a link to the alarm from ebay. https://cgi.ebay.com.au/dll?ViewItem&category=31250&item=4546164469&rd=1 Thanks again for your help guys.
Posted By: nava94
Date Posted: April 30, 2005 at 12:06 AM
most alarms have a negative and positive door trigger input. does your alarm only have a positive door trigger input?
Posted By: bmwboi
Date Posted: April 30, 2005 at 3:40 AM
Thanks for your reply nava94 The alarm has only one door trigger wire. During testing the wire from the brain will show +5v (wire not connected to anything yet). The alarm only has one trigger input. The manual doesnt even mention if the wire was positive or negitive trigger. In the diagram the blue wire -----------------> One side of door pin Other side of door pin -------------------> ground So i assume this is the Positive door trigger? As for the door triggers it self. Ive found one wire that will show 12v closed and 0 open. Negitive door trigger? Do i use this diagram https://www.the12volt.com/images/pos2neg.gif to get the door triggers to work? Ps. When I connected everything with out relays. The alarm will go crazy when ever the doors are open. The indicators dont stop flashing.
Posted By: nava94
Date Posted: April 30, 2005 at 11:07 AM
you don't have a green wire for the negative door trigger input from the alarm harness?if that's the only door trigger input from your alarm then yes you just connect that wire to the door pin in your car. if like you wrote when you open the door the voltage drops to zero then you have negative door triggers so you don't need the relay set up.just make sure the wire on the car you tested does the same thing when you open the other doors.if it does then connect the blue wire from your alarm to the door trigger wire on the car.if the other doors don't react the same way and the voltage on the wire from the car still remains the same when you open the other doors then you have to find the other door pins for the rest of the doors and diode isolate them from one another to the blue wire of your alarm.
Posted By: bmwboi
Date Posted: April 30, 2005 at 4:45 PM
Ive tried to connect it the way you mentioned. It seems like when ever the dome light or door triggers are on the alarm just keeps flashing its lights. Have i found the wrong door trigger wire?
Posted By: nava94
Date Posted: May 01, 2005 at 1:05 AM
no you have the right door pins the alarm brain is defective.
Posted By: bmwboi
Date Posted: May 01, 2005 at 3:40 AM
Hi Nava94 Is it normal that the door trigger wire from the brain of the alarm to show +5v if its a negitive trigger? ill have to explain this to get a replacement.
|
