trying to create a horn honk output

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=5432
Printed Date: August 02, 2025 at 6:16 PM

Topic: trying to create a horn honk output

Posted By: chriswallace187
Subject: trying to create a horn honk output
Date Posted: November 13, 2002 at 8:24 PM

anyone have any ideas for creating a horn honk output on a Rattler 259D keyless entry/ remote start? there absolutely has to be some sort of honk when the vehicle remote starts. It would also be preferable for the horn to honk with the lock and unlock outputs. This remote start has (-) outputs for lock, unlock, and parking light flash. All ideas are appreciated.

-------------
C Renner's Auto Electronix
My service is cheap, quick, and good - pick any two

Replies:

Posted By: PLAYER69
Date Posted: November 13, 2002 at 8:29 PM

Does it have a - output for factory alarm disarm? If so you could use that.

Print Page | Close Window