Print Page | Close Window

90 honda civic starter interrupt

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=54447
Printed Date: May 10, 2025 at 2:51 PM


Topic: 90 honda civic starter interrupt

Posted By: calman91977
Subject: 90 honda civic starter interrupt
Date Posted: April 22, 2005 at 7:37 PM

need help! please



Replies:

Posted By: calman91977
Date Posted: April 22, 2005 at 7:48 PM
normally open or closed?



Posted By: mo12v
Date Posted: April 22, 2005 at 7:49 PM

Not sure what HELP U need????

StarterBLACK/ WHITEIGNITION SWITCH HARNESS

Relay wiring:

https://www.the12volt.com/relays/page2.asp



-------------
MO

Don't Learn from Others Mistakes
You Might Be the One That Knows.



Posted By: calman91977
Date Posted: April 22, 2005 at 7:50 PM
normally open or closed?



Posted By: mo12v
Date Posted: April 22, 2005 at 7:52 PM

Basic ............but it depends on your Alarm

posted_image



-------------
MO

Don't Learn from Others Mistakes
You Might Be the One That Knows.



Posted By: auex
Date Posted: April 22, 2005 at 8:19 PM
calman91977 wrote:
normally open or closed?

Depends on your alarm.

-------------
Certified Security Specialist
Always check info with a digital multimeter.
I promise to be good.
Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.



Posted By: calman91977
Date Posted: April 22, 2005 at 9:00 PM
a-10 alarm . armed output (-) 500ma provides a ground output while armed to activate stater kill. i have 90 civic i wired it as follows. 86 to 12v+ign 87 from ign (BLACK/ white wire) 30 to starter (same wire) 85 to alarm output. installed 1 amp blocking diode across 86 and 85. doesnt work please help thank you!



Posted By: nava94
Date Posted: April 23, 2005 at 12:46 PM
did you get the right starter wire? did you set the diode the correct way?




Print Page | Close Window