shaved door solenoid

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=54488
Printed Date: May 09, 2025 at 9:05 PM

Topic: shaved door solenoid

Posted By: 02SS
Subject: shaved door solenoid
Date Posted: April 23, 2005 at 4:47 PM

Is there any way to hook up shaved door solenoids to unlock section of clifford alarm as opposed to using aux channel of alarm? Any kind of diagram would be helpful. Oh by the way thanks for all the help on my domelight supervision question I finally got it up and running.

Replies:

Posted By: nava94
Date Posted: April 23, 2005 at 5:24 PM

you don't want to use the aux of the alarm to pop your door open?on what car? how many doors you want to pop open with alarm?

Posted By: Captanham
Date Posted: April 23, 2005 at 5:55 PM

yea it's easy, just use a relay for it, does the solenoid have a regular + - hookup? you could probably use a door lock relay set up to do it.. if you really need a diagram i'll draw one up but it's simple, put the door unlock output to 86, positive 12v to 86 and 87 and then put your output for the sol. to 30,, and ground the other side of the sol.. best thing to do if you aren't using aux output is to find a system with drivers priority, then the alarm will have two unlock outputs, one that will trigger all time and one that will trigger only after the first one already has, this way you can still disarm and not pop your doors, OR you can use it to do drivers and pass...

-------------
Bad Boys Customs
audio - video - security

If you use it. Suport it. Donate to the 12 volt!