Clifford Concept 50, Adding Remote?
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=54520
Printed Date: May 09, 2025 at 8:23 AM
Topic: Clifford Concept 50, Adding Remote?
Posted By: joe_1
Subject: Clifford Concept 50, Adding Remote?
Date Posted: April 24, 2005 at 4:39 AM
i took a concept 50 out of a car due to there only being i remote and it stoped working. but if possible i would like to program another into it but im not sure if the unit can be accessed because i dont know the pin is there any other way to get around this thanks in advance.
Replies:
Posted By: cosmoworks
Date Posted: April 25, 2005 at 1:04 PM
Has to be programmed with the Valet switch and you have to know the code. Try the default code, 2.
Posted By: Mercedesguy
Date Posted: May 03, 2005 at 2:51 PM
i have a similar problem with the same model clifford alarm system. i recently bought a used mercedes with the system installed and it didnt come with a remote for the alarm so i cant use the alarm. do you know where i can get a remote for it? or how i can use it without a remote? thanks, parker vess
parkervess@bellsouth.net
-------------
2654943:b24d7666
Posted By: cosmoworks
Date Posted: May 04, 2005 at 10:16 AM
Every once in a blue moon I see old 5 button Clifford remotes for sale on ebay. That's the only place I can think of gettting another remote cheap. Just make sure it's not a Gen 4 or 5 remote, as those wont work... you need the older ACG I remote I believe.
|