Print Page | Close Window

Hi-Tech Model HT-455

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=54557
Printed Date: May 09, 2025 at 6:30 PM


Topic: Hi-Tech Model HT-455

Posted By: DALEHELLER
Subject: Hi-Tech Model HT-455
Date Posted: April 24, 2005 at 9:24 PM

I'm trying to  get the above wired in to a 1991 GMC 1/2 ton pickup.  Alarm and sensor seem to work, but door locks - nada.  The alarm system has two leads, that go +12 v for lock/unlock.  Can't seem to figure out how to convert my 5 wire door lock tap-in.  Going directly to the lock/unlock motor does not seem to work in any configuration. 

I must be missing something simple.  No wiring diagram provided with alarm just pinouts that describe unlock as Negative door switch (I/P -) and Positive door switch (I/P+).

Any suggestions ?



-------------
Dale



Replies:

Posted By: iskidoo
Date Posted: April 25, 2005 at 12:03 AM
https://www.the12volt.com/images/5wap.gif


Print Page | Close Window