install audiovox keylessin 1998 dodge ram

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=54577
Printed Date: May 10, 2025 at 1:49 AM

Topic: install audiovox keylessin 1998 dodge ram

Posted By: phoenixstar
Subject: install audiovox keylessin 1998 dodge ram
Date Posted: April 25, 2005 at 1:43 AM

I bought an audiovox AA-925 keyless entry and are having serious troubles finding a couple wires. Cant find negative door sense input wire, parking light wire. or the door lock and unlock wires. Can anyone PLEASE help me find these wires. The color code diagram doesnt seem to help me either. It sasy alot of the stuff is in my kick panel and i couldnt find it.

Replies:

Posted By: floaterr
Date Posted: April 25, 2005 at 1:56 AM

1998 Dodge RAM

Not to be mean or rude or anything. But I have to have the info posted here be wrong.

Double your info with this and try again.

Posted By: phoenixstar
Date Posted: April 25, 2005 at 2:33 AM

What do you mean? I followed the diagram thats on this site that tells me Parking lights are a BLACK / YELLOW wire above my brake pedal and i dont see that....and i dont see the ORANGE / purple and pink/purple wires or 10 pin connector in my drivers kick panel.

Posted By: mo12v
Date Posted: April 25, 2005 at 8:55 AM

Door Lock wires are in Driver Kick Panel where they plug into boot that goes into door. U can release boot on outside to unplug or try and unplug from inside.

Dome Light	YELLOW (-)	26 PIN CONNECTOR BEHIND DRIVER DASH
Trunk Pin Switch
Parking Lamp	BLACK / YELLOW (+)	74 PIN CONNECTOR BEHIND DRIVER DASH or LIGHT SWITCH
Power Lock	ORANGE / VIOLET	10 PIN CONNECTOR IN ACCESS
Power Unlock	PINK/VIOLET	HOLE IN DRIVER KICK PANEL.AT BOOT

Reversal Rest At Ground Door Locks

-------------
MO

Don't Learn from Others Mistakes
You Might Be the One That Knows.

Posted By: phoenixstar
Date Posted: April 26, 2005 at 2:07 AM

Thanks for the help. I got it to where you press the button on the transmitter the lights will flash and horn will chirp......now im a little stuck on this reverse polarity thing....my kit came with a red ,RED / black, and green wire to hook up to the lock and unlock wires of the doors.....the kit has three wires and i have 4 wires i need to connect to....the manual mentions cars with a 4 wire reversed polarity and i think this could be me...and if i do fall under this category than i have to buy a relay? any idea how to hook up a relay or have any idea if i need one? And what type of relay do they make special ones for cars or AC or DC voltages any help would be great..thanks!!!!!

Posted By: phoenixstar
Date Posted: May 05, 2005 at 2:36 AM

i have 4 wires the control my locking and unlocking of the doors. 2 orange /purple and 2 pick/ purple and my module and a green red and a RED / black wire. My question is how is this suppose to be hooked up. Should i need a relay? If you have any info on this or kno what im talking about please help me. audiovox AA-925 is the set up i have.

Posted By: phoenixstar
Date Posted: May 05, 2005 at 2:38 AM

thats 2 pink/purple . sorry