viper 300esp problem
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=54627
Printed Date: May 20, 2024 at 6:12 AM
Topic: viper 300esp problem
Posted By: raydawg2000
Subject: viper 300esp problem
Date Posted: April 25, 2005 at 7:54 PM
ok ive been trying to help my friend out with his alarm and we can figure this about by troubleshooting. he has a viper 300esp and he got it about 2-3 years ago.
this is what works on it now
-auxillary output
-auto door locks
- panic button siren
not working anymore
- engine kill
- actual alarm
yea pretty much all security features of this alarm dont work, but the cool conveince features do. when he engages his alarm on the remote his doors lock, but his alarm doesnt engage. and like i mentioned earlier his engine kill doesnt work anymore.
anybody have any ideas or suggestions on what we should look at to try and fix this. the place he got it installed at is shutdown now so we cant take it back there.
Replies:
Posted By: swamprat323
Date Posted: April 25, 2005 at 8:04 PM
does the LED stay on at all times, it sounds like the alarm is in valet mode. to turn off. i bleive trun igntion on then back off then press the valet button. all this doen in 10 sec. aslo do it by remote.....open door hit button 1 then button 2 then button 1 again. the led shoudl go out.
Posted By: raydawg2000
Date Posted: April 25, 2005 at 8:07 PM
hmmm...i didnt even think of checking the LED light, its covered by some paneling thats why i never notice it. ill check it out when i get home and ill also try the valet mode thing.
thanks
Posted By: Ohmz
Date Posted: April 25, 2005 at 8:30 PM
if the siren doesn't chip, most likely it is in valet mode....
Posted By: raydawg2000
Date Posted: April 25, 2005 at 9:07 PM
yea it was in valet mode.
thanks for all the help guys.
Posted By: nava94
Date Posted: April 25, 2005 at 9:13 PM
no problem just don't let it happen again.
|