Print Page | Close Window

installing a starter disable w/ turn lights

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=54660
Printed Date: May 20, 2024 at 11:56 AM


Topic: installing a starter disable w/ turn lights

Posted By: Guss
Subject: installing a starter disable w/ turn lights
Date Posted: April 26, 2005 at 11:13 AM

Hi, I want to install a starter disable in my car and I want to use my turn lights. I know I have to use the third diagram of Passive Starter Kill, just I am not sure what to connect where it says: to horn positive, and from horn relay(+).

I do not if it's sound like dumb question, but I haven't figured out exactly what that means.

Thank you, I would appreciate if you can help me

Guss




Replies:

Posted By: Guss
Date Posted: April 29, 2005 at 12:59 PM

it is just a starter kill, i do not understand you. I want to use the layout where you use four relays(https://www.the12volt.com/relays/page2.asp), just that i don't know how to figure out what to connect where it says: to the horn positive and where it says: from horn relay(+). if anyone can help me i would appreciate it

thank you

Guss





Posted By: Guss
Date Posted: April 29, 2005 at 2:53 PM

sorry, I don't get it straight. if output is possitive I can connect it to #85 and connect #86 to ground. if it is negative can i connect them in the same way? How do I figure out if the output is possitive or negative?

thank you





Posted By: Guss
Date Posted: April 29, 2005 at 2:54 PM

sorry, I don't get it straight. if output is possitive I can connect it to #85 and connect #86 to ground. if it is negative can i connect them in the same way? How do I figure out if the output is possitive or negative?

so, what is the other layout used for?, the one with four relays

thank you





Posted By: Guss
Date Posted: April 29, 2005 at 3:11 PM

thank you, if output is negative what do i connect on the other one?





Posted By: nava94
Date Posted: April 30, 2005 at 11:33 AM
WHAT!......WHAT!.......WHAT!.......okay bro you want to use the lights to turn your relay on to start your car.then your writing about a horn with the four relay set up.PUMP YOUR BRAKES MAAAAAAN! What relay set up do you want to use bro?your acting like a girl in a clothing store. make up your mind and lets go.




Posted By: nava94
Date Posted: May 01, 2005 at 1:01 AM
excuse me bobk but this guy does not write like he is okay.the relay diagram on the forum has a picture along with a simple explanation. you even wrote do the math.





Print Page | Close Window