I don’t get it!
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=54706
Printed Date: May 13, 2025 at 12:16 AM
Topic: I don’t get it!
Posted By: c0ckeyed00
Subject: I don’t get it!
Date Posted: April 27, 2005 at 3:02 AM
I tried to wire my dome super for my 02 Ford F250 and I don't get the wiring. I found the wire that leads directly to the domelight. I tried to touch 12v to it and when I did, I heard relays going off.....????? Has anyone hooked up the domelight supervision on an 02 F250 before?
Replies:
Posted By: Powermyster
Date Posted: April 27, 2005 at 3:55 AM
What alarm is it. and you shold probabaly use a relay to turn it on rather than the alarm directly
What the output for the dome light supervision??
Posted By: dare_ds69
Date Posted: April 27, 2005 at 5:47 PM
you must have to use a relay to do it.------------- how own your mind, control your life.
MECP certified. always use a DMM
Posted By: Smoke Signals
Date Posted: April 27, 2005 at 8:08 PM
You can also get to the BLACK/ lt. blue wire in the grey molex connector to the right of the steering column. That's where I connected mine (2000 F250)
Posted By: c0ckeyed00
Date Posted: April 27, 2005 at 8:33 PM
I have a viper 791xv. when i was trying to do it i was testing with a 12v source. i followed the wire directly from the dome down to the kick panel, then when i cut it the domelight went off. so in my head i was set that this was the dome wire. then i tried to tap 12v to that wire so see the dome flicker but nothing...just relay clicking....i will try the ....."...BLACK/ lt. blue wire in the grey molex connector to the right of the steering column....".... tonite and see what happens. i will keep you informed. thanks hey Smoke Signals, when you hooked it up, did you just tap into it from a relay or did you diode it?
Posted By: mo12v
Date Posted: April 27, 2005 at 8:42 PM
Why did you cut the Dome Light wire?? U just need to splice in to it
-------------
MO
Don't Learn from Others Mistakes
You Might Be the One That Knows.
Posted By: c0ckeyed00
Date Posted: April 28, 2005 at 8:44 AM
i wanted to ake sure that was the one.....i thought another wire was the dome because it acted like it....when the domelight went on, it would get 12v so i hooked it up to that and when i tried it, a little light on my door went on....
Posted By: Smoke Signals
Date Posted: April 28, 2005 at 8:23 PM
No need for diode. Here's what you do: H1/4 (Blk/Wht) connects to terminal 85 on the relay. Tap the door trigger wire (blk/lt. blu) and connect to terminal 30 on the relay. Terminals 86 and 87 on the relay both connect to 12v constant. Hope this helps.
Posted By: nava94
Date Posted: April 28, 2005 at 10:58 PM
bad way of testing for a wire.so far you been lucky so buy a digital meter before you fry something.
Posted By: c0ckeyed00
Date Posted: May 05, 2005 at 12:30 AM
I finally got back in town and wire the domelight. I found the wire in the driver kick. thanks a lot for everyones help.
|