How to install DEI 516U in a Viper791XV

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=54831
Printed Date: May 02, 2025 at 6:58 PM

Topic: How to install DEI 516U in a Viper791XV

Posted By: rcgait1
Subject: How to install DEI 516U in a Viper791XV
Date Posted: April 29, 2005 at 2:16 PM

How hard is it to add this module to the Viper791XV? What connections need to be made? Is it plug and play? Any help would be appreciated.

-rcgait1@yahoo.com

Replies:

Posted By: auex
Date Posted: April 29, 2005 at 7:50 PM

Here is the install manual As for installation, if you are installing it at the same time as the alarm then it only adds a couple extra minutes. If not then it is tagging 5 or 6 wires.

-------------
Certified Security Specialist
Always check info with a digital multimeter.
I promise to be good.
Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.

Posted By: Captanham
Date Posted: April 30, 2005 at 11:29 AM

if you have the viper get the 516L it's ment for their own products

-------------
Bad Boys Customs
audio - video - security

If you use it. Suport it. Donate to the 12 volt!

Print Page | Close Window