dei 451m and actuators wiring them up
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=54841
Printed Date: May 09, 2025 at 11:41 PM
Topic: dei 451m and actuators wiring them up
Posted By: medside
Subject: dei 451m and actuators wiring them up
Date Posted: April 29, 2005 at 5:23 PM
hi, i have a viper alarm, and i'm trying to hook up the dei 451m with the dei actuators. not sure what number they are. when i looked at the dei 451m wires, there were only one blue and one green. so do i split the wire into two, so i can do both doors. sorry new at this. thanks
Replies:
Posted By: auex
Date Posted: April 29, 2005 at 7:39 PM
Purple 12V
White and brown Ground
Blue and Green These goto the wires that come off of the actuators. It depends on which way you mounted the actuators as to which wire is lock and unlock. So yes you join the wires from both actuators to the relay module.
-------------
Certified Security Specialist
Always check info with a digital multimeter.
I promise to be good.
Tell Darwin I sent you.
I've been sick lately, sorry I won't be on much.
|