Print Page | Close Window

viper 791XV on mercedes

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=54863
Printed Date: May 10, 2025 at 4:54 AM


Topic: viper 791XV on mercedes

Posted By: Markland556
Subject: viper 791XV on mercedes
Date Posted: April 30, 2005 at 2:08 PM

ok, i got a Mercedes 300E 86' and im gunna get a Viper 791XV and i had a few questions. How is it gunna work with my air locks? How can i protect my trunk?



Replies:

Posted By: nava94
Date Posted: May 01, 2005 at 1:10 AM
check out the diagrams on the left for the relay set up to connect to the vacuum door locks on benz.should be able to get the wires at the driver kick or at the vacuum pump.let us know how it went.




Posted By: Velocity Motors
Date Posted: May 01, 2005 at 10:28 AM

TRUNK/HATCH PIN-------------BLACK / YELLOW---------------| - |located at trunk light or alarm

The lock wires are located at either kick panel. Blue wire located in 1/4 inch blk rubber tube with RED / wht and brown wires coming out of drivers door. Passenger side same except trigger wire is green. Pump located under rear seat on passenger side. You have to use a type E system : https://www.velocitymotorsport.com/images/install_notes/E.jpg



-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA





Print Page | Close Window