2000 mustang remote start problems

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=54880
Printed Date: May 13, 2025 at 9:50 PM

Topic: 2000 mustang remote start problems

Posted By: prdjr165
Subject: 2000 mustang remote start problems
Date Posted: April 30, 2005 at 7:37 PM

I installed a crimestopper rs900 on a 2000 mustang with a pkf1 ignition bypass module.the car will not start with the doors locked,if I unlock first it will start.somehow the bypass module is not working with the doors locked.

Replies:

Posted By: Velocity Motors
Date Posted: April 30, 2005 at 9:38 PM

What wire did you use for the PKF1 ground when running ?

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Posted By: prdjr165
Date Posted: April 30, 2005 at 10:47 PM

I used the yellow/blk (-)ign out wire,I think I know what to check.I need to see if that wire is programed for ign out or starter disable.

Posted By: Velocity Motors
Date Posted: May 01, 2005 at 10:42 AM

The wire is defaulted for IGN(-) so it won't bypass the module when remote start is attempted. Change program option 12 on the programming chart.

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Print Page | Close Window