Print Page | Close Window

Carbine Plus 4600, Power Lock Wire

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=54924
Printed Date: May 14, 2024 at 2:45 AM


Topic: Carbine Plus 4600, Power Lock Wire

Posted By: ochelz
Subject: Carbine Plus 4600, Power Lock Wire
Date Posted: May 01, 2005 at 5:14 PM

HI,

Im working on my friends car and she has a Carbine Plus 4600 Alarm System.  Im putting actuators on her doors since they arent automatic.  Here is where my problem comes in.  Whoever installed it before didnt leave me the power lock and power unlock wire.  And another thing is the plug that goes behind the brain has three pins coming out.  I know two of those pins are for lock and unlock put what the hell is the other pin for.  If someone that done these systems before please give me some help. 

Thanks




Replies:

Posted By: ccroadshop99031
Date Posted: May 04, 2005 at 12:44 AM
the middle pin is a constant 12v to trigger relays it is low amperage


Print Page | Close Window