2001 Chevy Monte Carlo Remote Start
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=54968
Printed Date: June 15, 2024 at 4:49 AM
Topic: 2001 Chevy Monte Carlo Remote Start
Posted By: pjules
Subject: 2001 Chevy Monte Carlo Remote Start
Date Posted: May 02, 2005 at 10:30 AM
Hi, I have installed an remote start alarm on a 2001 montecarlo. I am having toruble with the remote start feature. I have installed the DEI 555l and the car will not start, it wont even turnover. I do all the voltage check at the relay and when the alarm engages the starter, i get the 12volt at the start wire, but it wont start. Now I am confused as I thought passlock 1 disengages the starter and fuel, and the passlock 2 disengages trhe fuel only. Someone please help. The wires that are coming out of the lock cylinder colors are Black,White, and Yellow. There is also 2 thin wires coming out of the main ignition wire on top of the switch, I think one of them is black and whit, and the other is blue or green. Like I said I hooked up the 555l and still no crank/turnover. When I put the key in the the ignition in the turn position and I apply 12volt to the start wire, it starts. Someone please help.
-------------
PJJ
Replies:
Posted By: Velocity Motors
Date Posted: May 02, 2005 at 12:28 PM
The Monte Carlo uses Passlock II and you should be setting the 555L to bypass a Passlock II system. Did you test the ground when running wire for (-) current ? Also, make sure that you have the proper side of the starter disable relay on the motor side of the cut starter wire ( if you installed this ). If you did not, look at the wiring for your Passlock II bypass.
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
Posted By: pjules
Date Posted: May 02, 2005 at 10:44 PM
When you test the ground when running wire for negative current what do you mean? There is voltage flowing through the relay when in remote start as I test it, but the starter will not engage under remote start.
-------------
PJJ
Posted By: mo12v
Date Posted: May 02, 2005 at 11:19 PM
The BLUE / Black wire on 555L needs ground while Starting & Running. Be sure you have the correct wire from your RS hooked to it. Also, make sure you have programmed ( Learned ) the 555L ------------- MO
Don't Learn from Others Mistakes
You Might Be the One That Knows.
Posted By: misterjimbo
Date Posted: May 03, 2005 at 2:16 PM
ok why dont you try to this. diconnect the ground when running wire, now put the key into the cylinder but do not turn it. now remote start the car. does it start? if so there is a problem with the bypass. if it does not start tehn there is a problem with the remote start wiring.. like mentioned above, if you have a kill relay makes sure that the remote start wire is on the motor side of the kill relay. -------------
|