Compustar 2WSS-AS Problem
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=55020
Printed Date: May 12, 2024 at 5:53 PM
Topic: Compustar 2WSS-AS Problem
Posted By: ZQ8pAUL
Subject: Compustar 2WSS-AS Problem
Date Posted: May 03, 2005 at 1:26 AM
OK guys, I've basically got my 2WSS-AS hooked up, with the exception of remote start because I'm waiting on the PLXR module. When I go to learn the remote to the brain, I take the battery out of the remote, cycle the key on and off 5 times like it says, then after the brain clicks twice, i put the battery back into the remote. For some reason the remote isn't reading the brain or vice-versa, and I can't use the remote to arm the system. Any ideas on what the problem is?
Replies:
Posted By: Velocity Motors
Date Posted: May 03, 2005 at 6:42 AM
Place the battery in the remote before you toggle the system 5 times ( WITHIN 3 SECONDS ) and press button # 1 after this. It is VERY important that you do the toggling within 3 seconds and press button # 1 right after otherwise this sequence will not work. I will try to answer your PM later today. I've been really busy the last couple of days and seem to have less and less time as summer rolls in. ------------- Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
Posted By: ZQ8pAUL
Date Posted: May 03, 2005 at 2:19 PM
serious problem now. I got the alarm to work, but now it won't unlock and my keys are inside the truck! what do i need to do???
Posted By: ZQ8pAUL
Date Posted: May 03, 2005 at 2:35 PM
well i found my spare keys, got into the truck, now i can't get the brain to do anything... Any ideas?
Posted By: ZQ8pAUL
Date Posted: May 03, 2005 at 3:10 PM
ok well I figured that problem out. Blew the ignition fuse. There are two BROWN / white wires on the park light harness and i can't get the park lights to flash, and when it's hooked to one, the fuse blows when the alarm is armed, the other wire it doesn't do anything, no park light flash or anything at all.
Posted By: Calgarysouth
Date Posted: May 03, 2005 at 3:32 PM
what kind of truck is it??? i can't think of one where the park light wire is BROWN / white
Posted By: ZQ8pAUL
Date Posted: May 03, 2005 at 4:13 PM
it's a 2004 chevy colorado.
Posted By: Calgarysouth
Date Posted: May 03, 2005 at 6:46 PM
okay, so are you using negative parklights on the alarm??
Posted By: ZQ8pAUL
Date Posted: May 03, 2005 at 7:11 PM
there's one wire that says its for the park lights, it's a thicker gauge than the other one that says its for the light output.
Posted By: Velocity Motors
Date Posted: May 04, 2005 at 12:01 AM
If your using the (-) parking lights of the Colorado, then you can not use the GREEN / WHITE wire from the CN1 harness. YOu can only use the (-) parking light wire from the GREEN one from the CN2 harness.
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
|