Code Alarm CA640 remote programming

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=55290
Printed Date: July 12, 2025 at 3:18 PM

Topic: Code Alarm CA640 remote programming

Posted By: cable43
Subject: Code Alarm CA640 remote programming
Date Posted: May 07, 2005 at 10:20 AM

I have a Code alarm CA640 Alarm.

After changing my battery I went to reprogram my remotes ant the alarm won't accept them. I tried both of them.
everything on the alarm seems fine it arms its self, the LED works, starter kill, disarm button, door locks, Everything except it won't take a transmitter when i get into the programming mode???

anyone have any ideas about this .. or experience this with other alarms??

Replies:

Posted By: swamprat323
Date Posted: May 07, 2005 at 8:29 PM

check your PM

Print Page | Close Window