Compustar and Ford Explorer
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=55314
Printed Date: July 13, 2025 at 11:06 PM
Topic: Compustar and Ford Explorer
Posted By: hckynut
Subject: Compustar and Ford Explorer
Date Posted: May 07, 2005 at 8:46 PM
I have a 2004 Ford Explorer V8. I have had a pretty easy time installing the wirring harness for the compustar CM3000 module. I have but one questions. Where do you hook up the blue wire that comes out of the relay, on the CN1 connector? I am lost. All of you different post have helped me so far. Thanking any one in advance for the help
Replies:
Posted By: Velocity Motors
Date Posted: May 08, 2005 at 11:16 AM
You do not need to hook this up to anything. It's for the 2nd ACC, IGN or STARTER wire, but the Explorer has none of these, so tape it off and do not use or cut it out of the harness to save you room and then you have an extra relay for something else.
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
|