Viper 790xv with 791xv remote, programing

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=55413
Printed Date: May 15, 2025 at 2:24 PM

Topic: Viper 790xv with 791xv remote, programing

Posted By: 97civic123
Subject: Viper 790xv with 791xv remote, programing
Date Posted: May 09, 2005 at 11:28 AM

I have a 790xv alarm (older 2 way remote starter), and just bought a replacement remote (479v) 2 way remote which is on the newer 791xv alarms. I'm having compatiablity issues programming it. I know it's possible but i dont' know how to do it. i followed the step by step instructions on the back of the remote package, but it's not working correctly. also i looked at the viper 790 and 791xv manuals, and no help there. can someone help me with a step by step to do this?

Replies:

Posted By: dare_ds69
Date Posted: May 09, 2005 at 5:54 PM

open the door, turn the ignition on press the valet botton 9 times and hold it you will hear 8 chirps, then press lock botton and you will heard another chirp turn the key off and try it

-------------
how own your mind, control your life.
MECP certified. always use a DMM

Posted By: raydawg357
Date Posted: May 10, 2005 at 2:31 PM

Dare is correct. The instructions on the package works only when you are replacing that remote for the same exact remote.

-------------
Do it right the first time

Print Page | Close Window